Scientific instrument Wikipedia

WE BUY USED LAB EQUIPMENTDo you have any idle or surplus instruments taking up space? We’ll pay you and pack and remove the used laboratory equipment from your facility, https://xcritical.com/ making it as easy as possible for you to maximize your return on investment. We also offer excellent trade-in value, which you can apply to the equipment you need.

GenTech is offering an Agilent 1200 LC System with Binary Pump & DAD for $24,999. The fiberscopes are used in a variety of applications such as computer repair, medicine, locksmithing, machining, safecracking, espionage, and computer forensics among several others. The gas detectors alert operators in the area where the gas leakage occurs and provides an opportunity to advert hazards. This is significant at such places because there are several gases that can be injurious to humans and also animals. The device can detect flammable and toxic gases, combustible, and oxygen depletion.

ey Molecular-Level Insights into the Role of Interfacial Water

Physical chemistry is primarily focused on investigating the behavior of matter on both a molecular and atomic scale. Additionally, physical chemists also examine how chemical reactions occur to determine the mechanisms by which complex structures are formed. At MYCO, we consistently work together with our customers to purchase their old equipment. With over 40 years of experience, we strive to make the purchase process hassle-free and will go the extra mile to gain your trust.

This circuit note uses a Class B Pt100 RTD sensor with an accuracy of ±0.3°C at 0°C but it can support other classes such as Class A, Class AA, 1/3 DIN, or 1/10 DIN that are higher accuracy RTDs. This circuit also has provision for Pt1000 RTDs that are useful in low power applications. The circuit shown in Figure 1 is a complete thermopile-based gas sensor using the nondispersive infrared principle. This circuit is optimized for CO2 sensing, but can also accurately measure the concentration of a large number of gases by using thermopiles with different optical filters. The printed circuit board is designed in an Arduino shield-compatible form factor and directly interfaces to the EVAL-ADICUP360 Arduino form factor-compatible platform board for rapid prototyping.

An 18MHz gain bandwidth, and 10V/μs slew rate, along with the wide supply range and low input capacitance, make them perfect for use as fast signal processing amplifiers. The MAX44242 provides a combination of high voltage, low noise, low input bias current in a dual channel and features rail-to-rail at the output. The device incorporates three drift compensating feedback resistors for the required external transimpedance amplifier that scales the output voltage. Offset and gain scaling registers allow for generation of multiple output span ranges, such as 0 V to 2.5 V, 0 V to 5 V, 0 V to 10 V, −5 V to +5 V, and −10 V to +10 V, and custom intermediate ranges with full 16-bit resolution. The ADPD4100/ADPD4101 operate as a complete multimodal sensor front end, stimulating up to eight light emitting diodes and measuring the return signal on up to eight separate current inputs.

History of scientific instruments

The most common instruments classified as electrochemical instruments are potentiostat, zero resistance ammeters, and galvanostat. They are also used to assist in the water management from public sources, manufacturing processes, wastewater, besides the pharmaceutical industry. Complete specifications for the ADuCM355 are available in the ADuCM355 data sheet, which must be consulted in conjunction with the EVAL-ADuCM355QSPZ user guide when using the EVAL-ADuCM355QSPZ. The EVAL-ADAQ7980SDZ can also evaluate the ADAQ7988, despite being populated with the ADAQ7980. To mimic the evaluation of the ADAQ7988 performance, limit the maximum sample rate of the ADAQ7980 to 500 kSPS in the ADAQ798x Evaluation Software.

However, some scientific instruments can be quite large in size and significant in complexity, like particle colliders or radio-telescope antennas. Conversely, microscale and nanoscale technologies are advancing to the point where instrument sizes are shifting towards the tiny, including nanoscale surgical instruments, biological nanobots, and bioelectronics. The Analog Devices, Inc., ADA4945-1CP-EBZ evaluation board allows the user to evaluate the performance of the ADA fully differential amplifier. The ADA4945-1CP-EBZ evaluation board can be configured to accept either a single-ended or differential input signal. Electrochemical sensors offer several advantages for instruments that detect or measure the concentration of many toxic gases. Most sensors are gas specific and have usable resolutions under one part per million of gas concentration.

Used Lab Equipment

At the melting point, there is a change in light transmission through the sample, which is automatically detected with the METTLER TOLEDO Excellence Melting Point Systems. In addition to melting point, the versatile MP80 Excellence Melting Point System offers automatic determination of further physical properties, such as boiling point, cloud point and slip melting point. A fume hood or fume cupboard is a piece of laboratory equipment designed to limit exposure to dangerous fumes. The air inside the fume hood is either vented to the outside or else filtered and recirculated. GenTech Scientific can help you choose the right instrument fit for your analytical needs, and back it with our robust training and servicing programs. INSTALLATIONOur cross-country network of trainers and engineers are ready to help you install and get up and running on a variety of used analytical instruments, including LC, LC/MS, GC, and GC/MS.

• As it is not possible to measure the sample temperature directly using a certified thermometer, the temperature accuracy is checked using reference substances, ideally with certified temperature values.
• Some of these MS techniques include ambient surface ionization, secondary ion MS, secondary neutral MS , laser desorption ionization MS and laser ablation MS (LA-MS).
• The digital filter allows simultaneous 50 Hz/60 Hz rejection at 27.27 SPS output data rate.
• We highly recommended that you use METTLER TOLEDO melting point standards for calibration and adjustment purposes of METTLER TOLEDO melting point instruments.

The device also offers a multitude of filter options, ensuring that the user has the highest degree of flexibility. Our analytical instrument power supplies are a key component in many analytical instrumentation applications. The SL Power TU, TB, TE and TF Series are designed to address all of the main areas of concern. In addition, these power supplies were designed to last as long as the end equipment, by using only high quality, long-life electrolytic capacitors well within their ratings.

Life ScienceView all

On-board power converters produce the required supply rails from a single voltage supply provided by the development platform board. Low noise, high power supply rejection ratio voltage regulators ensure that the switching noise is minimized. A high precision, high stability, on-board hermetically sealed voltage reference ensures the high precision and accuracy of the 20-bit system. The circuit shown in Figure 1 represents a simple DCS system composed of a host and a single node with two 4-channel isolated analog input boards and two 4-channel isolated analog output boards controlled locally by an Arduino form factor baseboard. The RS-485 transceiver interfaces with a PC or other host, from which the user can exchange data with the node using the Modbus protocol. Toxic gas detection instruments are widely used to alert people of elevated levels of dangerous gases.

Twelve time slots are available, enabling 12 separate measurements per sampling period. Precision systems, including closed loop systems, with high resolution time domain analysis or frequency domain analysis all require precision and wide bandwidth. Some of the major factors responsible for rising consumption of analytical instruments. It includes the growing rate of chronic diseases, population growth, aging population, higher disposable income, and rising life expectancy.

In the calorimetry process, the instrument measures the heat produced during physical or chemical reactions. The calorimeters come in different types depending on the physical or chemical nature of activities to be conducted. The spectrophotometers are used in different scientific fields including chemistry, physics, molecular biology, and physics.

Life at AQ

The design of the switches minimizes error sources so that they add virtually no error in the signal path. The output driver can be used in either single-ended or a differential mode and is ideal for driving the input of an ADC. The ADA also offers low offset voltage, low offset drift, and low voltage and current noise needed for the types of applications that require such low leakages. The ADuCM355 operates from a 2.8 V to 3.6 V supply and is specified over a temperature range of −40°C to +85°C. The internal ADC and voltage DAC circuits use this on-chip reference source to ensure low drift performance for all peripherals.

For sample preparation, a dry powdery substance is ground in a mortar and filled into the capillaries, which are then inserted into the furnace. The melting point accessories box by METTLER TOLEDO contains everything needed for accurate and reproducible sample preparation. Good Melting and Dropping Point Practice is a 5 step program to improve your measuring process. It covers the entire lifecycle of your investment and helps to improve quality while reducing risks and costs. Optimize your melting point workflow using our smart accessories, such as accessory boxes. These helpful add-ons include our innovative sample preparation tool and certified melting point standards.

Waters Acquity UPLC H-Class System With PDA Detector

Modern equipments show groundbreaking features like touch screen LCDs with outstanding operability for settings, trend graph viewing, and calibrations. Other may comprise integrated probe and converters and may not need a sampling system. The circuit shown in Figure 1 is a dual-channel colorimeter that features a modulated light source transmitter and a synchronous detector receiver. The circuit measures the ratio of light absorbed by the sample and reference containers at three different wavelengths. Automatic detection is provided for either 100 Ω or 1000 Ω platinum resistance temperature devices , allowing the conductivity measurement to be referenced to room temperature. The circuit shown in Figure 1 uses a photometric front end and a network of 860 nm infrared emitters and silicon PIN photodiodes to achieve a water turbidity measurement system.

The T Series models provide enhanced performance to all of the critical operational parameters. The photodiode receiver conditioning path includes a programmable gain transimpedance amplifier for converting the diode current into a voltage and for allowing analysis of different liquids having wide variations in light absorption. The 16-bit sigma delta (Σ-Δ) analog-to-digital analytics instrument converter provides additional dynamic range and ensures sufficient resolution for a wide range of photodiode output currents. This functionality allows smart, accurate sensor replacement at the individual edge nodes. An integrated, ultra low power microcontroller directly biases the electrochemical gas sensor and runs onboard diagnostic algorithms.

Each configuration consists of gain, filter type, output data rate, buffering, and reference source. The LT8609S is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7µA of non-switching quiescent current. The micropower, rail-to-rail operation of the LTC6078/LTC6079 is well suited for portable instruments and single supply applications.

Add clarity, simplicity and confidence to your most delicate analytical routines

The AD3552R is a low drift, ultra-fast, 16-bit accuracy, current output digital-to-analog converter that can be configured in multiple voltage span ranges. Analytical instruments are a huge class of instruments which are used for analytical applications in pharmaceutical, chemical, oil refineries, clinical, and food processing laboratories. Most common types of analytical equipment’s are refractometer, spectrophotometer, electrochemical instrument, calorimeter, automatic density meter, conductivity meter, colony counter, automatic titrators, fiberscopes, demagnetizers, and many others.

The power options make the AD7124-4/AD suitable for nonpower critical applications, such as input modules, and also for low power applications, such as loop-powered smart transmitters where the complete transmitter must consume less than 4 mA. The analog front end rejects signal offsets and corruption from asynchronous modulated interference, typically from ambient light, eliminating the need for optical filters or externally controlled dc cancellation circuitry. Multiple operating modes are provided, enabling the ADPD4100/ADPD4101 to be a sensor hub for synchronous measurements of photodiodes, biopotential electrodes, resistance, capacitance, and temperature sensors.